2018


(1) Kaboglu C, Mohagheghian I, Zhou J, Guan Z, Cantwell W, John S, Blackman BRK, Kinloch AJ, Dear JP, 2018. High-velocity impact deformation and perforation of fibre-metal laminates, Journal of Materials Science, 53:4209–4228.        https://dx.doi.org/10.1007/s10853-017-1871-2

(2) Jing Y,  Gao X, Su D, Zhao C, Jiang J,  2018. Increasing Zr content on the performance of Ti-Zr-Cu-Ni amorphous brazing fillers used on brazing Ti-6Al-4V, Journal of Manufacturing Processes, 31:124-130. https://doi.org/10.1016/j.jmapro.2017.11.005

 

2017


(1) Galindo-Nava EI, Jing YJ, Jiang J, 2017. Predicting the hardness and solute distribution during brazing of Ti-6Al-4V with TiZrCuNi filler metals, Material science and Engineering A, https://doi.org/10.1016/j.msea.2017.11.087

(2) Zheng J, Davies CM, Lin J, Pan R, Li C, 2017. Constitutive modelling of a T74 multi-step creep ageing behaviour of AA7050 and its application to age formed aluminium components, Procedia Engineering 207: 281-286.           https://doi.org/10.1016/j.proeng.2017.10.775

(3) Lyu F, Huang X, Zeng Y, Shi Z, Wang M, 2017. A Numerical simulation for creep age forming of aluminium alloy 7050 saddle-shaped part, Procedia Engineering 207: 299–304. https://doi.org/10.1016/j.proeng.2017.10.778

(4) Jing Y, Su D, Yue X, Britton TB, Jiang J, 2017. The development of high strength brazing technique for Ti-6Al-4V using TiZrCuNi amorphous filler, Materials Characterization, 130:526-531. https://doi.org/10.1016/j.matchar.2017.07.039

(5) Zheng J, Pan R, Li C, Zhang W, Lin J, Davies CM, 2017. Experimental investigation of multi-step stress-relaxation-ageing of 7050 aluminium alloy for different pre-strained conditions, Material science and Engineering A, in press. https://doi.org/10.1016/j.msea.2017.10.066

(6)Xiong W, Wang X, Dear JP, Blackman BRK, 2017. The effect of protrusion density on composite-metal joints with surfi-sculpt reinforcement,Composite Structures, 180: 457-466. https://dx.doi.org/10.1016/j.compstruct.2017.08.036          http://hdl.handle.net/10044/1/50394

(7) Gao H, El Fakir O, Wang L, Politis DJ, Li Z, 2017. Forming limit prediction for hot stamping processes featuring non-isothermal and complex loading conditions, International Journal of Mechanical Sciences.       http://dx.doi.org/10.1016/j.ijmecsci.2017.07.043

(8) Ahn J, He E, Chen L, Dear JP, Davies CM, 2017. The effect of Ar and He shielding gas on fibre laser weld shape and microstructure in AA 2024-T3, Journal of Manufacturing Processes, 29: 62-73.   https://dx.doi.org/10.1016/j.jmapro.2017.07.011 http://hdl.handle.net/10044/1/50122

(9) Ahn J, He E, Chen L, Wimpory RC, Dear JP, Davies CM, 2017. Prediction and measurement of residual stresses and distortions in fibre laser welded Ti-6Al-4V considering phase transformation, Materials and Design, 115: 441-457. http://dx.doi.org/10.1016/j.matdes.2016.11.078 http://hdl.handle.net/10044/1/43907

(10) Lee J, Balint DS, 2017. Optimal Shunt Parameters for Maximising Wave Attenuation with Periodic Piezoelectric Patches, Journal of Intelligent Material Systems and Structures, 28:108–123. https://dx.doi.org/10.1177/1045389X16645861 http://hdl.handle.net/10044/1/39605

(11) Ahn J, Chen L, He E, Davies CM, Dear JP, 2017. Effect of filler metal feed rate and composition on microstructure and mechanical properties of fibre laser welded AA 2024-T3, Journal of Manufacturing Processes, 25: 26-36. http://dx.doi.org/10.1016/j.jmapro.2016.10.006 http://hdl.handle.net/10044/1/43911

2016


(1) Jia L, Yu L, Zhang K, Li M, Jia Y, Blackman BRK, Dear JP, 2016. Combined modelling and experimental studies of failure in thick laminates under out-of-plane shear, Composites Part B: Engineering, 105: 8-22. http://dx.doi.org/10.1016/j.compositesb.2016.08.017

(2) Ahn J, Chen L, Davies CM, Dear JP, 2016. Parametric optimisation and microstructural analysis on high power Yb-fibre laser welding of Ti-6Al-4V, Optics and Lasers in Engineering, 86: 156-171. https://dx.doi.org/10.1016/j.optlaseng.2016.06.002

(3) Pan R, Shi Z, Davies CM, Li C, Kaye M, Lin J, 2016. An integrated modelling method for residual stress removal through multiple cold forging operations in manufacturing extra large AA7050 T-section panels, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, http://dx.doi.org/10.1177/0954405416673097

(4) Jing Y, Yue X, Gao X, Su D, Hou J, 2016. The influence of Zr content on the performance of TiZrCuNi brazing filler, Materials Science and Engineering A, http://dx.doi.org/10.1016/j.msea.2016.09.115

(5) Pan R, Davies CM, Zhang W, Shi Z, Pirling T, Lin J, 2016. The Effectiveness of Cold Rolling for Residual Stress Reduction in Quenched 7050 Aluminium Alloy Forgings, Key Engineering Materials, 716: 521-527. http://dx.doi.org/10.4028/www.scientific.net/KEM.716.521

(6) Lee J, Balint DS, 2016. Measuring the Band Structures of Periodic Beams using the Wave Superposition Method, Journal of Sound and Vibrations, 382: 158-178. https://dx.doi.org/10.1016/j.jsv.2015.03.041

(7) Zhou D, Yuan X, Gao H, Wang A, Liu J, El Fakir O, Politis DJ, Wang L, Lin J, 2016. Knowledge Based Cloud FE Simulation of Sheet Metal Forming Process, Journal of Visualized Experiments. http://hdl.handle.net/10044/1/29407

(8) Lee J, Balint DS, 2016. Optimal Shunt Parameters for Maximising Wave Attenuation with Periodic Piezoelectric Patches, Journal of Intelligent Material Systems and Structures. https://dx.doi.org/10.1177/1045389X16645861

(9) Lee J, Balint DS, 2016. A Parametric Study on the Mechanical and Dispersion Properties of Cubic Lattice Structures, International Journal of Solids and Structures, 91: 55-71. https://dx.doi.org/10.1016/j.ijsolstr.2016.04.028

(10) Gao H, Weng T, Liu J, Li Z, Wang L, 2016. Hot stamping of an Al-Li alloy: a feasibility study, Manufacturing Review, 3(5). http://dx.doi.org/10.1051/mfreview/2016006

(11) Wang X, Ahn J, Lee J, Blackman BRK, 2016. Investigation on failure modes and mechanical properties of CFRP-Ti6Al4V hybrid joints with different interface patterns using digital image correlation, Materials & Design, 101: 188-196. http://dx.doi.org/10.1016/j.matdes.2016.04.005

(12) Wang X, Ahn J, Kaboglu C, Long Y, Blackman BRK, 2016. Characterisation of composite-titanium alloy hybrid joints using digital image correlation. Composite Structures. 140: 702-711. http://dx.doi.org/10.1016/j.compstruct.2015.12.023 

2015


(1) Lam ACL, Shi Z, Lin J, Huang X, 2015. Influences of residual stresses and initial distortion on springback prediction of 7B04-T651 aluminium plates in creep-age forming, International Journal of Mechanical Sciences, 103, pp. 115–126. doi:10.1016/j.ijmecsci.2015.09.004

(2) Hu Y, Yuan X, Ma G, Masen M, Wang L, 2015. Tool Life Prediction under Multi-cycle Loading Conditions: a feasibility study, Manufacturing Review, 2 (28).  doi:10.1051/mfreview/2015031

(3) Lam ACL, Shi Z, Huang X, Yang Y-L, Zeng Y, Lin J, 2015. Material modelling and its application to creep-age forming of aluminium alloy 7B04. Manufacturing Review, 2 (19).  doi:10.1051/mfreview/2015022

(4) Xiong W, Blackman B, Dear PJ, Wang X, 2015.  The effect of composite orientation on the mechanical properties of hybrid joints strengthened by surfi-sculpt. Composite Structures, 134, pp. 587-592. doi:10.1016/j.compstruct.2015.08.083

(5) Ji K, Gao H, El Fakir O, Wang L, 2015. Determination of heat transfer coefficient for hot stamping process, Materials Today: Proceedings, 2S, S434 – S439. doi:10.1016/j.matpr.2015.05.059

(6) Lee J, Balint D, 2015. An inverse method to determine the band structure of periodic structures based on wave superposition. Journal of Sound and Vibration, 350, pp. 41-72. doi:10.1016/j.jsv.2015.03.041

(7) Liu J, Wang L, Lee J, Chen R, El-Fakir O, Chen L, Lin J, Dean TA, 2015. Size-dependent mechanical properties in AA6082 tailor welded specimens. Journal of Materials Processing Technology, 224, pp. 169-180. doi:10.1016/j.jmatprotec.2015.05.004

(8) Wang X, Ahn J, Bai Q, Lu W, Lin J, 2015. Effect of forming parameters on electron beam Surfi-Sculpt protrusion for Ti-6Al-4V, Materials and Design, 76, pp.202-206. doi:10.1016/j.matdes.2015.03.065

(9) Ma G, Wang L, Gao H, Zhang J, Reddyhoff T, 2015. The Friction Coefficient Evolution of a TiN Coated Contact During Sliding Wear, Applied Surface Science, 345, pp. 109-115. doi:10.1016/j.apsusc.2015.03.15

(10) Lam ACL, Shi Z, Lin J, Huang X, Zeng Y, Dean TA, 2015. A method for designing lightweight and flexible creep-age forming tools using mechanical splines and sparse controlling points. International Journal of Advanced Manufacturing Technology, 80, pp. 361-372. doi:10.1007/s00170-015-6982-9

(11) Gao H, Li N, Ho H, Zhang Y, Zhang N, Wang L, Lin L, 2015. Determination of a set of constitutive equations for an Al-Li alloy at SPF conditions, Materials Today: Proceedings, 2S, S408 – S413. doi:10.1016/j.matpr.2015.05.056

2014


(1) Lam AC, Lin JG, 2014. A validated analytical solution for the two-dimensional bending of aluminium plates under creep-ageing conditions. Key Engineering Materials, 622 – 623, pp. 1107 – 1116.   doi:10.4028/www.scientific.net/KEM.622-623.1107