BEng Electrical and Electronic Engineering
Focus on the design and application of large and small scale electronic systems to process and transmit energy and information in this professionally accredited degree.
Three A-level offer: A*AA
Applications : admissions ratio
7 : 1
Based on 2017 entry data
- UCAS course code: H600
- ECTS: 186
- Start date: September 2019
- Department: Department of Electrical and Electronic Engineering
- Campus: South Kensington
Electrical and electronic engineers are at the forefront of the challenge to use technology to improve the performance of electronic equipment in terms of speed, cost and sustainability; to improve power distribution and control for a robust and sustainable future energy network; and to improve communication in different aspects of life.
It’s a discipline which impacts on almost every area of our lives, including communications, commerce, entertainment, manufacturing, healthcare, transport, energy and the environment.
Years one and two follow a core programme covering the fundamentals of electrical and electronic engineering in areas such as analogue and digital electronics, communication and control, alongside mathematics and computing modules.
You will learn to analyse and optimise systems by modelling them. You will also focus on programming, with the chance to use the latest computing technologies.
In your third year you start to design your degree programme to fit your interests and skills in consultation with your personal tutor. You choose from a range of advanced subjects in electrical and electronic engineering, together with a humanities or language module through Imperial Horizons or a business module in collaboration with Imperial College Business School.
The most important part of this year is the individual project. It allows you to implement the technical information assimilated over the course of your degree, and develop novel approaches to present-day problems.
Engineers are innovators and problem solvers – you need practical skills, planning, time management and the ability to work as part of a team.
You'll start developing your engineering skills through a structured programme of project work from your first year, with a group project to establish the basics of the engineering design process.
You begin by deconstructing a simple electronic toy and using a circuit simulation program to understand how it works. You then propose and design some enhancements to the toy and try them in the circuit simulator. Finally, you build your chosen design and test it in competition with other groups.
Group projects in your second and third year let you investigate the technical, social and financial aspects of products and services, and how to design, build and test them.
You will also have weekly classes in the electrical and computer laboratories to gain valuable practical experience.
By your final year you'll be fully equipped to demonstrate all your knowledge, skills and innovation in a large and ambitious individual project. This project is the most important single piece of work in your degree programme, giving you the chance to demonstrate independence and originality, and to plan and organise a large project.
Transfer between courses
The common first and second years of our Electrical and Electronic Engineering courses mean that transfer between streams is usually possible up until the end of your second year; or third year for the Year Abroad option.
- Transfer from the BEng to the MEng stream is conditional upon meeting specified academic criteria (such as a certain minimum grade in Year 2 Mathematics).
- Transfer from MEng to Year Abroad is made during Year 3
- You must normally be achieving at least a 2:1 degree standard in order to be eligible for the Year Abroad course.
There is no benefit in applying to more than one course in this Department so you should only apply to one. If you are unsure which to choose, you have the option to transfer to another course within the Department during the first year, though you will need to meet the original requirements of the course you are transferring to.
If you wish to transfer from an Electrical and Electronic Engineering degree to a degree in Electronic and Information Engineering you need to do so by the start of the first year.
If you are an international student, transferring to a different course could have an impact on your Tier 4 visa. Please visit our International Student Support webpage for further information.
Please note that the curriculum of this course is currently being reviewed as part of a College-wide process to introduce a standardised modular structure. As a result, the content and assessment structures of this course may change for your year of entry. We therefore recommend that you check this course page before finalising your application and after submitting it as we will aim to update this page as soon as any changes are ratified by the College.
Find out more about the limited circumstances in which we may need to make changes to or in relation to our courses, the type of changes we may make and how we will tell you about changes we have made.
- Analogue Electronics 1
- Analysis of Circuits
- Digital Electronics 1
- Energy Conversion
- Engineering Design and Practice
- Introduction to Signals and Communications
- Mathematics 1
- Semiconductor Devices
- Software Engineering 1: Introduction to Computing
- Electronics Lab
- Group Design Project
- Algorithms and Data Structures
- Analogue Electronics 2
- Communication Systems
- Computer Architecture
- Control Engineering
- Digital Electronics 2
- Mathematics 2
- Power Engineering
- Signals and Linear Systems
- Computing Lab
- Electronics Lab
- Group Design Project
You choose two modules from below.
- Algorithms and Complexity
You choose four modules from below.
- Analogue Integrated Circuits and Systems
- Artificial Intelligence
- Biomedical Electronics
- Communication Networks
- Communication Systems
- Control Engineering
- Digital Signal Processing
- Electrical Energy Systems
- Mathematics for Signals and Systems
- Microwave Technology
You choose two modules from below.
- Advanced Electronic Devices
- Advanced Signal Processing
- Digital System Design
- Embedded Systems
- High Level Programming
- Introduction to Machine Learning
- Power Electronics
- Real-time Digital Signal Processing
Humanities and Business
You choose one module from below.
- Imperial Horizons – offers a wide range of modules, including languages and humanities options, which are designed to broaden your education, inspire your creativity and enhance your professional impact
- Business for Professional Engineers and Scientists
You can choose a project from an extensive list proposed by members of academic staff. Due to the variety of staff expertise, the list covers a wide range of engineering topics. Proposing your own project is encouraged, and is done in collaboration with a member of staff who is an expert in the proposed field.
Download the programme specification [PDF] – this is the most up-to-date version available for this course. It may change for your year of entry. If/when changes to this course are approved by the College, we will update this document and the information on this course page.
This course is professionally accredited by the Institution of Engineering and Technology (IET) on behalf of the Engineering Council for the purposes of fully meeting the academic requirement for registration as an Incorporated Engineer and partly meeting the academic requirement for registration as a Chartered Engineer.
Achieving a professionally accredited degree demonstrates to employers that you have achieved an industry-recognised standard of competency.
Like our MEng degrees, our BEng degree counts towards the educational requirements for becoming a Chartered Engineer (CEng). A CEng is a highly respected qualification earned by professionals working in engineering, which can lead to higher earning potential and better career prospects. It also brings international recognition of your qualification, which is particularly useful for students preparing for a career abroad.
While our MEng degrees fully satisfy the educational requirements of this professional qualification, BEng graduates will need to undertake further study on graduation to demonstrate that their knowledge is at Master's degree level.
All applicants for CEng status will also need to demonstrate their ability to meet competences described in the Engineering Council's UK-SPEC.
Our accreditation agreement with the Institution of Engineering and Technology is renewed every five years.
The current accreditation agreement is due to be renewed for students starting their studies in the 2023–24 academic year. The Department expects to be accredited into the future.
As well as your main Imperial degree, you will also receive the award of the Associateship of the City and Guilds of London Institute (ACGI) on completion of this course.
The City and Guilds of London Institute is one of three historic Colleges that came together to form Imperial College London in 1907.
Find out more about our Associateships.
Teaching and assessment
We place great importance on teaching you the underpinning analytic bases of the subject from the start. To do this, we use a combination of the following teaching methods:
- Group projects
- Hardware laboratory
- Individual projects
- Industrial placement (MEng option only)
- Problem solving classes
- Software laboratory
- Tutorial sessions
Teaching, independent study and placement hours
|Year 1||Year 2||Year 3|
|Lectures, seminars and similar||455 hours||458 hours||222 hours|
|Independent study||1,045 hours||1,042 hours||1,278 hours|
|Based on the typical pathway through the course|
- Coursework software or hardware deliverable
- Oral and poster presentations
- Written examinations
|Year 1||Year 2||Year 3|
|Based on the typical pathway through the course; percentages have been rounded to the nearest whole number|
All your modules are taught by our academic staff, who are experts in their field and often bring their extensive research experience into the classroom. Some modules, such as mathematics, are taught by specialised teaching fellows. Your laboratory sessions are run by academic staff, who are supported by our technical staff, and graduate and undergraduate teaching assistants (GTAs and UTAs).
Compare this course
See how this course compares with similar courses at different institutions using the Unistats information below.
You can use the Unistats website to find out how this course compares in areas such as student satisfaction and what our graduates are doing six months after completing this course.
We welcome students from all over the world and consider all applicants on an individual basis – see selection process below.
For advice on the requirements for the qualifications listed here please contact the Department (see Contact us).
We also accept a wide range of international qualifications. If the requirements for your qualifications are not listed here, please see our academic requirements by country page for guidance on which qualifications we accept.
Minimum entry standards
Our minumum entry standard for 2019 entry is A*AA overall, to include:
- A* in Mathematics
- A in Physics
- A in a preferred subject
General Studies and Critical Thinking are not accepted.
- Computer Science/ Computing
- Design and Technology
- English Literature
- Further Mathematics
- Languages (Classical and Modern)
- Music/ Music Technology
Typical offer range
As a guide, here are the typical offers made in 2017 to at least 85% of applicants studying A-levels:
Three A-level offer: A*AA-A*A*A
Practical endorsement (practical science assessment)
If you are made an offer you will be required to achieve a pass in the practical endorsement in all science subjects that form part of the offer.
Minimum entry standards
Our minumum entry standard for 2019 entry is 38 points overall, to include:
- 6 in Mathematics at higher level
- 6 in Physics at higher level
Typical offer range
As a guide, the typical offer made in 2017 to at least 85% of applicants studying IB was 38–40 points overall.
The grades detailed below are the minimum requirements for students offering only Advanced Placements as their exams for entry to Imperial.
If you are studying a High School Diploma that is accepted by Imperial alongside Advanced Placements, requirements may apply to both your Diploma and Advanced Placements.
Please consult our country index to check whether we accept your High School Diploma programme for admission.
Our minimum requirement for this course is grades 5, 5, 5 to include:
- 5 in Calculus BC
- 5 Physics C (Electricity and Magnetism, or Mechanics)
- 5 in another Physics C subject, or another subject*
* excluding Calculus AB, Physics 1 or Physics 2
Preferably, 4 in another two subjects.
Assessing your application
Admissions Tutors consider all the evidence available during our rigorous selection process and the College flags key information providing assessors with a more complete picture of the educational and social circumstances relevant to the applicant.
Some applicants may be set lower offers and some more challenging ones. It is the College’s policy to not make offers below three A’s at A-level in relevant subjects, 38 IB points with at least a grade 6 at higher level in relevant subjects, or their equivalent.
A typical range of offers made by this Department in 2017 (encompassing at least 85% of applicants who studied A-level or IB) is shown above.
Post-application open day and interview
We encourage applications from all who want to learn what it takes to create our future. You should have the potential to succeed in a challenging course, as demonstrated by meeting our entry grades. But we are looking beyond your raw marks for a passion in developing your knowledge and understanding of this broadest form of engineering. In addition to your academic ability, we will look at your personal statement and reference to understand your personal motivation, your commitment to your chosen area of study, and your broader interests.
If your UCAS application indicates that you are likely to satisfy our requirements and you live within reasonable travelling distance of the College you will be invited for one of our interview afternoons.
Here you will be interviewed by a member of academic staff on general engineering topics and your aspirations for the future. You will also have the opportunity to ask any questions you have about our courses and life at Imperial, and be shown around the campus by our Department’s undergraduate students.
If we are considering making you an offer and you are overseas, or unable to visit, we will arrange a telephone or Skype interview.
English language requirement (all applicants)
All candidates must demonstrate a minimum level of English language proficiency for admission to the College.
For admission to this course, you must achieve the higher College requirement in the appropriate English language qualification. For details of the minimum grades required to achieve this requirement, please see the English language requirements for undergraduate applicants.
Academic Technology Approval Scheme (ATAS)
An ATAS certificate is not required for overseas students who apply for this course.
For more information about the Academic Technology Approval Scheme (ATAS), please see the International Student Support website.
Tuition fees and funding
We charge tuition fees for every year that your course lasts. The fee you will be charged is based on your fee status, which is determined by government regulations.
Tuition fees (Home and EU students)
|£9,250 per year|
The above fee applies to the academic year 2018–19 only as a guide.
The fee for Home students is controlled by the UK government and has not yet been confirmed for 2019 entry.
Please note that the fee you pay may increase annually by an amount linked to inflation and approved by Parliament under the Student Fees (Inflation Index) Regulations 2006 – currently the measure of inflation used is the RPIX.
If you're a Home student, you can apply for a Tuition Fee Loan from the UK government to cover the entire cost of tuition for every year of your course.
You can also apply for a means-tested Maintenance Loan to help towards your living costs.
The UK government has not yet confirmed the funding arrangements for EU students starting a course in 2019.
For the latest updates for EU students please see the Imperial and the European Union website.
Tuition fees (Overseas and Islands students)
|£29,000 per year|
The tuition fees for Overseas and Islands students are set by Imperial College London.
The fee above is listed as a guide and the fee for 2019 entry is yet to be confirmed by the College.
You should expect and budget for your tuition fee increasing each year by an inflationary amount. The measure of inflation used will be the Retail Price Index (RPI) value in the April of the calendar year in which the academic session starts e.g. the RPI value in April 2019 will apply to fees for the academic year 2019–2020.
Additional course costs
This section outlines any additional costs relevant to this course, which are not included in your tuition fees. It is possible that all, or only some, of these will be relevant to you.
Please note that the figures provided are usually based on the cost in the most recent academic year. These are likely to change from year to year. However, it is useful for you to be aware of the types of things you may have to pay for and their approximate cost to help you budget for student life at Imperial.
This section indicates whether any additional costs that apply are mandatory or optional. Mandatory costs are those that you will need to pay to fully participate in and complete your studies. Optional costs are not essential to your studies so you will be free to opt out of these.
|Description||Mandatory/optional||Guide to cost|
|Equipment (course materials)||Mandatory||Provided|
|Equipment (laptop computer)||Variable||Optional|
|Personal Protective Equipment||Mandatory||Provided|
|Please review the information below for more information on the costs listed in the table.|
The Department of Electrical and Electronic Engineering will provide you with the necessary materials for your study free of charge, within reason. We encourage you to bring your own devices, but a number of laptops can be obtained on loan. The Library has multiple copies of the recommended textbooks to support the different modules.
You will need a laptop for some classes and coursework. Any modern device running Windows, Linux or Mac OS X will be suitable. For Windows users, the minimum specification for the 2017–18 academic year was:
- Windows 10 capable
- Intel i5/i7 6th/7th generation processor
- 8GB RAM
- 256 GB SSD HDD
The Department has a number of laptops available for daily loan.
Personal Protective Equipment (PPE)
Wearing personal protective equipment is compulsory for some activities on this course. Where this applies, we will provide you with the necessary PPE free of charge.
Accommodation and living costs
Living costs, including accommodation, are not included in your tuition fees.
Over 90 per cent of Imperial undergraduates choose to live in our halls of residence in their first year. You can compare costs across our different accommodation options on our Accommodation website.
A rough guide to what you might expect to spend to live in reasonable comfort in London is available on our Fees and Funding website.
Bursaries and scholarships
Our graduates are highly sought after worldwide for a wide range of careers in fields such as electrical energy, circuit design, computer gaming, software development, image processing, technical consultancy, academic research, telecommunications, finance and management.
Recent graduates of the Department have become:
- Graduate Electronic Engineer, Dyson Technology
- Chassis Electronics Engineer, Jaguar Land Rover
- Financial Software Developer, Bloomberg LP
- Graduate Engineer, Transport for London
- Research Assistant, Imperial College London
How to apply
UCAS key information
- UCAS course code: H600
- UCAS institution code: I50
UCAS Apply system
To apply to study at Imperial you must use the online application system managed by the Universities and Colleges Admissions Service (UCAS).
All applications, other than those which include choices for medicine at Imperial, must be submitted to UCAS by 18.00 (UK time) on 15 January 2019 for entry in September 2019.
The deadline for medicine courses at Imperial starting in 2019 is 18.00 (UK time) on 15 October 2018.
Tracking your application
Once you’ve completed and submitted your application through UCAS’s online Apply service, you can use UCAS’ Track system to follow its progress and manage your choices.
See our How to apply section for further guidance.
You may also be interested in the following related departments and the courses they offer:
Got a question?
T: +44 (0)20 7594 6198
Read more on the Department of Electrical and Electronic Engineering website.
Living in London
London’s fusion of culture and charm will give you a student experience unlike any other, and our first-year accommodation guarantee means that you'll have the perfect base from which to explore this exciting city.
We want to attract the very best students, regardless of their financial background. That's why we offer the most generous bursary scheme of any UK university, as well as a range of scholarships.
Imperial is proud to be the most international university in the UK, welcoming students from over 130 countries.